← Back
Bona Traffic GO one-component water-based polyurethane finish

Bona Traffic GO

Single-component polyurethane with the performance of a 2K. No mixing. No pot life. No wastage.

What it is

Traffic GO is Bona's next-gen one-component water-based polyurethane. The hardener is built into the coating and activates once you apply it, so you get 2K-level durability without the mixing step, without the pot-life clock running, and without the leftover finish going in the bin.

Why installers use it

Sheen options

Traffic GO vs Traffic HD?

Traffic HD is the 2K commercial benchmark -- mix part A into part B, fastest recoat window, bulletproof once cured. Traffic GO gives you most of that toughness in a one-pot container, so you skip the mixing step and the pot life. Pick GO when you want the simplicity and zero waste; pick HD when you're in the middle of a big commercial job and want the maximum hardness Bona makes. Both use the same Classic UX or Prime Intense underneath.

How to apply

Sand to a fine grit, dust off, prime with Classic UX (or Prime Intense if you want grain pop / tannin control). Two coats of Traffic GO with a light intercoat abrade between. 2-3 hours drying between coats. Walk-on traffic after 24 hours. Back to full use in about 3 days.

Traffic GO in action

Watch with captions on YouTube →

Spec a GO job?

Ring with the species, the square meters, and the sheen you want. You'll get the primer, the litres, and the grit sequence in one call.

Call 1300 950 551

Also in the range

Traffic HD, Mega, Wave 2K, Hard Wax Oil, Classic UX primer, Prime Intense, SIA abrasives, Quantum T adhesive. See the full range.

Related FAQs →