← Back
Bona Classic UX water-based primer and sealer

Bona Classic UX

The everyday primer. Natural timber tone, great filling, easy to abrade, non-yellowing.

What it is

Classic UX is Bona's workhorse water-based primer -- light colouration, keeps the timber looking like the timber, and sets up a clean even base for any Bona topcoat above it. It's also the matching primer for Bona Traffic HD Raw when you're going for a truly "untreated" look.

Why installers use it

Coverage & specs

Classic UX or Prime Intense?

Classic UX is the default -- natural tone, most species, most jobs. Reach for Prime Intense instead when you're working a high-tannin hardwood like blackbutt or tallowwood (Classic UX is not recommended on those because tannin bleed can wash through), or when you specifically want to pop the grain and deepen the colour. Ring with the species and we'll tell you which one.

How to apply

Sand to a fine grit and dust off. Roll or T-bar Classic UX at ~8 m²/L. Give it 1-2 hours to dry. Light intercoat abrade, then two coats of your topcoat -- Traffic HD or Traffic GO for commercial, Mega or Wave 2K for residential, Traffic HD Raw for the untreated look.

Priming a floor this week?

Ring with the species, the square meters and the topcoat you're using. You'll get the litres and the sequence in one call.

Call 1300 950 551

Also in the range

Bona Prime Intense, Traffic HD, Traffic HD Raw, Traffic GO, Mega, Wave 2K, Hard Wax Oil, SIA abrasives, Quantum T adhesive. See the full range.

Related FAQs →